VT7S12E Dual Channel Vibration Transmitter
- Compact DIN Rail mounting.
- 4 Digit LED display for Parameter Value & 1 Digit LED display for channel no.
- Same model Field Configurable for Acceleration, Velocity or Displacement range.
- Dual channel (optional single channel).
- Transmitter/Input signal health check
- Relay for Alarms/Trip
- RPM Measurement (optional)
- Serial Modbus Interface (optional)
VSW150 Vibration Switches
- 3 in 1 Vibration Transmitter, Display ,Switch.
- Bright 3½ – digit LED display.
- Vibration range available upto 50mm/S.
- Relay and analog output.
- Set value Switch.
- Long/remote Mounting provision For high Temperature application.
VSW160 Vibration Switch
- Switch-Indicator-Transmitter functionality.
- Bright 3½ digit, 7 segment LED display.
- Measurement Parameters: Velocity, Acceleration.
- Unit: RMS, Peak-to-Peak or Peak(1) (factory set).
- Precise isolated analog output 4-20mA (optional) for interfacing further to PLC, SCADA System or other instrumentation.
- Remote sensor or inbuilt sensor option.
- Available in Wall Mount, Panel Mount or Flush mount option.
VT7S10 Vibration Transmitter
- Loop power vibration transmitter (4-20 mA output).
- Measurement of overall vibration level in rotating machines.
- Dynamic buffered signal output for analysis.
- Velocity range 0-12.5, 25, 50mm/S.
- Frequency Range(10hz to 1khz)
- Excitation Voltage(19-30 VDC)
- Sensor Temperature upto 150 Degc.
VMS-4SE Multichannel Vibration Monitor
- Online Vibration Monitoring.
- Micro controller Based
- 230 VAC Power Supply.
- 4 Channel Monitoring.
- Rs485/232 Output for communication.
- Parameters : Acceleration, Velocity, Displacement.
409-S RMP Indicator
- Monitors, Protects & Transmits Turbine & Rotating Machines Speed.
- Bright 5 digit Display with brightness control.
- Programmable events per rotation.
- 2 Set point with Relay output for Alarm/Trip.
- Analog output for PLC/DCS interface.
- Modbus RTU output on RS485 for SCADA.
VM908 Vibration Meter